Hiper接收机是TOPCON公司2001年推出的一种新型GPS接收机，集GPS天线、GPS接收机、电台、锂电池为一体，是真正意义的全内置一体机。
HiPer可以自由升级。通过软件升级的方式，可以从单频GPS升级为双频GPS，或单频GPS升级成GPS+GLONASS。还可以在你需要时，临时升级为短期的双频GPS。
HiPer操作简单。操作界面MINTER上只有两个功能键和两个指示灯，即可完成全部的操作和信息指示。HiPer可以储存400个小时以上的L1数据。
HiPer可以通过增加基准站设备和流动站的内置电台来实现RTK测量。这样在流动站只有和手簿相连的一根电缆线。
技术指标：
构造性能
40个通道GNSS接收机，内置天线和充电电池,
内置电台，带有MINTER操作界面。
跟踪特性
跟踪通道： 40个L1 GPS通道(标准配置)
可选通道： 20个GPS L1+L2(GD)或GPS L1+GLONASS
跟踪信号： L1 C/A码、P码和载波；L2 P码和载波
性能指标
基线精度 3mm+1ppm(L1+L2) 5mm+1ppm(L1)
RTK精度 10mm+1.5ppm(L1+L2) 15mm+2ppm(L1)
冷启动 <60秒
热启动 <10秒
再俘获 <1秒
电源说明
电 池： 内置锂电，1个外接电源输入口
外接电源： 6-28伏DC
功 耗： 小于3瓦
天线指标
GPS/GLONASS 天线：内置
天线类型： 微带天线(零相位中心)
地网类型： 平面地网
电台说明
SpSp 电台： 内置900MHz或2.4GHz
UHF 电台： 内置接收或外置接收/发射
基准站输出功率： 0.5W/2.0W/35W
I/O端口
通讯口： 4个RS232口
其它信号口： 1PPS和事件标识
状态指示： 两个三色指示灯,两个功能键
控制手簿： Husky FS/2、FS/3、Ranger、3rd Party
存储和记录
内置存储器： 最大可达96M
原始数据记录率： 最快可达20次/秒(20HZ)
数据类型： GPS/GLONASS L1/L2的码和载波
数据输出
实时数据输出： RTCM SC104 version2.2
ASCII 输 出： NMEA 0183 version2.2
其 它 输 出： TPS 格式
输 出 率： 最快可达20次/秒(20Hz)
环境指标
外 壳： 特殊合金材料 全防水
工作温度： -40℃-+55℃
体 积： 159×172×88(mm)
重 量： 1.65kg
可选功能
双频和双卫星系统
内置900MHz SpSp电台
内置2.4GHz SpSp电台
内置GSM模块
5Hz和10Hz原始数据更新率
5Hz、10Hz和20Hz RTK
内部存储器从4Mb到96Mb
CMR/RTCM输入/输出
频率输入输出
事件标识
通用附件
拓普康天线
LegAnt 平面地网天线
扼流圈天线
AirAnt航空天线
UHF基准站或流动站电台套件
对中杆、三角架
基座和连接器
运输包或运输箱
|
If you are looking to add the most advanced
GPS technology to your business, look no further than the new
Topcon HiPer®+. From the extremely successful HiPer family
of compact, integrated GPS receivers, the new HiPer®+
continues to offer the advantages of a small, lightweight
design and the power of dual-constellation satellite tracking.
In addition, the HiPer+ boasts wireless communication and an
advanced center-mount UHF antenna design that boosts RTK
performance and distance without any degradation of GPS
signals!
Everything you need to perform GPS work is
fully integrated in each model in the HiPer® family.
Receiver, antenna, power supply and the RTK radio link are all
neatly packaged inside the rugged, compact housing of the
HiPer+.
Now avalible
with GSM modem option!
The new HiPer+ now can be ordered with either internal radio
or with internal GSM cell phone communications. With GSM, just
add a SIM card from a domestic service provider and TopSURV
GPS+ controller software to obtain rover connectivity with
cell-based reference station networks and long-range RTK
without radios.
- A data plan from a cellular service
provider is required to use GMS communications.
- Service providers that currently offer
GMS/Data capabilities and SIM cards are: AT&T,
T-Mobile, and Cingular Wireless. Nextel offers GMS service
but no SIM cards necessary for HiPer+.
- Contact a service provider for coverage
maps and more information.
|
|
|
The HiPer®+ also has the option of
dual-constellation (GPS plus Glonass) tracking, which provides
40% more satellite coverage than GPS alone! That means
downtime due to poor satellite coverage or obstructions is
virtually eliminated, and only Topcon brings dual frequency
GPS+ positioning technology to its users.
But that’s only the beginning. With the
addition of an optional external field controller like
Topcon's FC-1000,
you have the most advanced RTK rover system available! No need
to carry around a toolbox full of hardware, batteries, and
cables with Topcon's HiPer+. We make RTK GPS+ positioning
easier than ever.
|
|
HiPer®+
Technology Firsts:
• World's first
wireless dual-constellation GPS system
• World's first advanced performance center-mount RTK
UHF antenna
• World's first integrated 40 channel dual frequency
receiver with our Paradigm™
chip and integrated Bluetooth® technology
• World's first GPS system with advanced Co-Op
tracking for unsurpassed under-canopy performance
|
|
Specifications
| Description |
40 channel integrated GPS+
receiver/antenna with
MINTER interface. |
|
Tracking
Specifications
Tracking
channels
Signals Tracked
|
standard: 40 L1 GPS
(20 GPS L1+L2 on Cinderella* days)
optional: 20 GPS L1+L2 (GD), GPS L1 + GLONASS (GG), GPS
L1+L2+GLONASS (GGD)
L1/L2 C/A and P Code
& Carrier and GLONASS
|
|
Performance
Specifications
Static, Rapid
Static
RTK
|
Horizontal: 3mm+ 0.5ppm (x baseline length)
Vertical: 5mm+ 0.5ppm (x baseline length)
Horizontal: 10mm+ 1.0ppm
Vertical: 15mm+ 1.0ppm
|
Power
Specifications
Battery
Operating Time
External power input
Power consumption |
Internal Lithium-Ion batteries plus 1 external power port
14+ hours
6 to 28 volts DC
Less than 4.2 watts
|
Environmental
Specifications
Enclosure
Operating Temperature
Dimensions
Weight |
Aluminum extrusion, waterproof
-30°C to 60°C / -22°F to 140° F
W:159 x H:172 x D:88 mm / 6.25" x 6.75" x
3.5"
1.65 kg / 3.64 lbs
|
GPs+ Antenna
Specifications
GPS / GLONASS Antenna
Antenna Type
Ground Plane |
Integrated
Center-mount UHF antenna
Antenna on a flat ground plane |
Radio
Specifications
UHF Radio Modem
Base Power Output
CDPD & GSM Modem |
Internal Rx or External Tx/Rx
0.5W/2.0W/35W
Optional Accessory |
Wireless
Communication
Communication |
Bluetooth® version 1.1 comp.**† |
I/O
Communication
Ports
Other I/O Signals
Status Indicator
Control & Display Unit |
4x serial (RS232)
1pps, Event Marker
4x3-color LEDs (Green, Red, Yellow), two-function keys
(MINTER)
External: FC-1000, Ranger, or 3rd Party |
Memory &
Recording
Raw Data Recording
Data Type |
Up to 20 times per second (20Hz)
Code and Carrier from L1 and L2, GPS and GLONASS |
Data Output
Real
time data outputs
ASCII Output
Other Outputs
Output Rate |
RTCM SC104 version 2.1, 2.2, 2.3, CMR, CMR+
NMEA 0183 version 2.2
TPS format
Up to 20 times per second (20Hz) |
|
